5.0 Liter System

 

The 5.0 liter system is a racing approved system by SCCA, PRO-SCCA, Trans Am, World Speed Challenge, American Le Mans, NASA, and others. This is a 4 nozzle, 3 zone system utilizing the newest T-style nozzle, bulkhead fitting, 20 ft of aluminum tubing and the other features of the 2.3 liter system. This system is available as an owner rechargeable system and as a SFI 17.1 compliant system. The SFI 17.1 compliant system requires that the systems be shipped full, sealed, and certified for 2 years of service. We offer a re-certification program for both 17.1 and non-17.1 systems. Call our offices for more information or request information by writing to services@essfire.com.

This system was created for the hardcore racer. It is designed to provide three zones of coverage – driver, engine, and fuel cell. The aluminum cylinder and hardware keep down the weight and yet the 5 liters of suppression agent provides better coverage than the competition. The 5 liter system will produce approximately 30 liters of foam when activated, enough to subdue the most stubborn fire. In non SFI 17.1 compliant systems, you clean up with water and can recharge the system at the track with a recharge kit (retail under $70) and fresh water. The SFI 17.1 compliant version of the 5.0 liter system requires that the system be shipped back to us for recertification. We offer a re-certification program for both 17.1 and non-17.1 systems. The stainless steel t-bolt mounting brackets allow easy access for tech inspection and storage during the off season.

Contact your sanctioning body if you would like to use this system.

 

Key Benefits
  • Larger coverage area than the 2.3 liter
  • Meets or exceeds most sanctioning body requirements
  • It is also available in AFFF-AR for use on alcohol based fires
  • 19″ Overall length
  • 5 1/4″ bottle diameter
  • 7″ from floor to highest point
  • Weight Full 16 lbs. 2 oz.
  • Weight Empty 5 lbs. 4 oz.
  • CO2 cartridge weight 270 grams

 

Included Parts
Spun cast aluminum cylinder Aluminum 3 port head
Slotted pull cable bracket Adjustable length pull cable
Safety cup and pin for pull handle Safety pin for cylinder actuator
3 -4 AN to 1/4″ NPT head fittings 1 -4 AN bulkhead tee and nut
10 -4 AN nuts and sleeves Insulated “D” clamps
20ft. 1/4″ aluminum tubing 4 T-style nozzles
2 Stainless steel t-bolt band mounts with integrated feet Non-fracturing head seal
12 oz. AFFF concentrate Emergency “E” sticker
Detailed, illustrated instruction manual
Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter
  • Category Activity

  • New Posts